JVC HR-S7300U Instructions Manual page 22

22
+
–
1 2
4 5
DIGIT
7 8
0
3
6
MENU
9
SET
INITIAL SETTINGS (cont.)
INPUT RECEIVING CHANNEL
NUMBER
6
Press SET+/– or the appropriate DIGIT keys to input the
number of the channel on which the Guide Channel's
broadcasts are received. Then press SELECT.
If there is more than one mismatch, repeat steps 5 and 6
for each instance.
RETURN TO TUNER SET
SCREEN
7
Press MENU.
CHECK INPUT DATA
8
Press SET+/– to place the
arrow next to "GUIDE
CHANNEL MAP", then
press SELECT.
The Guide Channel and
VCR or cable box
channel numbers you
input appear on the
screen in ascending
order. Check to ensure
you've entered them
correctly.
If you entered more than
10 sets of numbers, press
SELECT to see the next
set of numbers.
Guide Channel Map
contains only the Guide
Channels and VCR channels that you entered. (Guide
Channels 90 through 99 may be included even if you
did not enter them; this has no effect on actual
operation.)
RETURN TO NORMAL
SCREEN
9
Press MENU as many times as necessary.
You can now use VCR Plus+ for quick and simple timer
programming ( pg. 40).
TUNER SET
BAND
AFC
AUTO CHANNEL SET
MANUAL CHANNEL SET
GUIDE CHANNEL SET
=GUIDE CHANNEL MAP
PRESS (SELECT, SET+/–)
PRESS (MENU) TO END
GUIDE CHANNEL MAP
GUIDE : VCR GUIDE : VCR
6 : 47 10 : 55
12 : 41 15 : 38
33 : 28 67 : 49
PRESS (SELECT) TO NEXT
PRESS (MENU) TO END