Hi-Fi Audio Recording Level Control - JVC HR-VP830U Instructions Manual

• • •
• •
• •
• •
• •
1
4
7
REW
MENU
NOTE:
Noise will increase if the recording level is too low, while
distortion will increase if the level is too high.
8
POWER
2 3
6
5
8 9
0
CH
FF
OK
TIME SCAN
Hi-Fi Audio Recording Level
Control
Your VCR allows manual adjustment of the Hi-Fi audio
recording level. Although the preset audio recording level is
satisfactory for normal recording, if the sound you are going to
record is too loud or too low, adjust the audio recording level
while referring to the VCR's audio level meters.
TURN ON THE VCR
1
Press POWER.
ACCESS MAIN MENU
SCREEN
2
Press MENU as many times as necessary.
ACCESS FUNCTION SET
SCREEN
3
Press CH 5 ∞ or TIME SCAN 5 ∞ to place the arrow
next to "FUNCTION SET", then press OK.
ACCESS HI-FI REC LEVEL
SCREEN
4
Press CH 5 ∞ or TIME SCAN 5 ∞ to place the arrow
next to "HI-FI REC LEVEL", then press OK.
SELECT MODE
5
Place the arrow next to
"MANUAL" by pressing
CH 5 ∞ or TIME SCAN
5 ∞.
ADJUST AUDIO RECORD-
ING LEVEL
6
Press FF or REW.
To move the on-screen's audio levels by one division
of the scale, press FF or REW briefly for 5 times in
succession. To move the audio levels faster, keep FF
or REW presssed.
Adjust the recording level so that the audio level
meters reach from 0dB to 4dB at the maximum sound
volume.
RETURN TO NORMAL
SCREEN
7
Press MENU as many times as necessary to exit.
43
HI-FI REC LEVEL CONTROL
PRESET
=MANUAL
PRESS PRESS
(REW) (FF)
MIN------ * ------MAX
PRESS ( 5 , ∞) TO SELECT
PRESS (MENU) TO END