Diting; Edit From A Camcorder - JVC HR-S7300U Instructions Manual

46
Edit From A
Camcorder
Recorder
+
–
AUDIO
IN
VIDEO IN
Camcorder
Player
1
4
7
DIGIT "0"
Your VCR
To rear panel PAUSE/SPECIAL
FUNCTION connector
Mini-plug cable (JVC camcorder
only)
VIDEO
OUT
AUDIO OUT
EDIT
2 3
5 6
MENU
8 9
SET
0
You can use a camcorder as the player and your VCR as the
recorder.
MAKE CONNECTIONS
1
Connect an AV cable between the camcorder's VIDEO
OUT and AUDIO OUT connectors and your VCR's
VIDEO IN and AUDIO IN connectors.
When a Master Edit Control-equipped JVC camcorder is
used, the camcorder is capable of controlling your VCR.
The mini-plug cable is a mono 3.5 mm mini-plug to
mono 3.5 mm mini-plug connector.
If connecting to a camcorder with a monaural output,
connect the audio output connector on the
camcorder to the AUDIO IN L of the VCR.
LOAD A CASSETTE
2
Insert the cassette to be recorded on into the recorder.
SET RECORDER'S INPUT
MODE
3
Press DIGIT key "0" to set to AUX.
ACCESS MAIN MENU
SCREEN
4
Press MENU as many times as necessary.
ACCESS FUNCTION SET
SCREEN
5
Press SET +/– to place the arrow next to "FUNCTION
SET", then press SELECT.
If you're using a JVC Master Edit Control-equipped
camcorder — step 6
If not — step 9
ACCESS SPECIAL
FUNCTION SCREEN
6
Press SET +/– to place the arrow next to "SPECIAL
FUNCTION", then press SELECT.
SELECT MODE
7
Press SET +/– to place the
arrow next to "R.A. EDIT/
PAUSE".
EDITING
SPECIAL FUNCTION
=R.A. EDIT/PAUSE
AV COMPU-LINK
PRESS (SET+/–) FOR CHOICE
PRESS (MENU) TO END