Initiating A Call - SoftBank 911SH Instruction Manual

Initiating a Call

2
See P.2-5 to initiate international calls from Japan and P.5-3 for Video Calls.
1
2
2-2
1
Confirm handset is on
^ Check signal strength (see P.1-9 1).
^ Handset will not transmit when E, U, b or
l appears (see P.20-4 - 20-6).
2
Enter a phone number
3
4
^ Include dialling code for all numbers.
C
To send/block Caller ID, enter a phone
number and press N x
Show My ID or Hide My ID
3 Confirm the number and press f
Correcting Numbers
^ Use F to move cursor and press i to
delete the digit above the cursor. Move
cursor and press i for 1+ seconds to
delete the digits above and after the cursor.
^ Before moving cursor, press i for
1+ seconds to delete the entire number and
return to Standby.
^ If you misdial, press g to hang up and try
again.
Busy Numbers
^ Press g to end the call and try again later.
Press g to end call
4
^ Alternatively, close handset.
Calling Numbers Not Saved in Phone Book
^ Save this number to your Phone Book?
appears after calls.
B To save, choose Yes
A
Select
Perform Step 4 in "Saving from Call Log"
A Press b
on P.4-8
B To end without saving, choose No
Press b
^ To hide this confirmation, see P.4-5
"Confirmation for Unsaved Numbers".
A Press b A
A