Table of Contents
Advertisement
Bluetooth#
Getting Started
Bluetooth# is a wireless technology that allows 911SH to communicate
with other 911SH within ten metres or with other compatible devices
(PCs, mobile phones, handsfree devices, etc.). In this chapter, "files"
refers collectively to the following: Bookmarks, Tasks, Text Templates,
Phone Book and Calendar entries; Messaging and Data Folder files.
Handset Bluetooth# Specifications:
Communication System
11
Bluetooth# Profiles Supported
Output
H
Note
Bluetooth# connection may not be possible with
some Bluetooth# devices.
^ Handset shall be connected to certified Bluetooth# devices that
meet the specification standards developed by Bluetooth SIG.
^ Depending on characteristics or specifications of the certified
Bluetooth# devices, connection or data transfers may fail, or
operational procedures, display content and actual operations
may differ from those described in this manual.
^ Noise may interfere with wireless or handsfree conversations
depending on the status of connected devices or signal conditions.
^ For details about headset/handsfree devices, see the
device manuals.
11-2
Bluetooth# specification Ver 2.0
Headset Profile
Hands-Free Profile
Dial-up Networking Profile
ObjectPush Profile
File Transfer Profile
Basic Imaging Profile
Bluetooth# Power Class 2
Precautions
^ Bluetooth# connections are available with compatible devices
supporting the same profile.
^ Bring handsets to within ten metres. Bluetooth# connection/
transfer rate is affected by distance between handsets,
obstructions, signal conditions, handset status, etc.
^ Bluetooth# operates in the 2.4 GHz unlicensed frequency
band. Depending on the status of other devices used in the
spectrum, Bluetooth# connection may slow down/terminate, or
the range may decrease.
Activating Bluetooth#
Activate Bluetooth# before receiving files or connecting
handset to handsfree devices.
Bluetooth# is Off by default.
H
A
Settings
Connectivity (F)
Main Menu
Switch On/Off
Choose On and press b
1
2 appears.
C
A
To cancel, choose Off
B When transmission is in progress, choose Yes
H
Note
Handset must be in Standby to accept connection
requests from other devices or to receive files; these
functions are disabled even in Standby if Password Lock/
Keypad Lock is active or firmware update is in progress.
A
A
Bluetooth
Press b
A
Press b
Advertisement
Table of Contents
