Incoming Transmissions - SoftBank 911SH Instruction Manual

Incoming Transmissions

Incoming Calls
TV pauses; press f to answer call. End call to return to TV.
(911SH returns to Standby after Video Calls or Circle Talk.)
^ To receive and answer calls without interrupting TV, see P.6-25
"Calls & Alarms".
^ TV recording continues when Voice Calls arrive, but
ends for Video Calls or Circle Talk requests.
^ If TV ends during a call (due to low battery, etc.), handset
returns to Standby after the call. If other functions are in use at
the same time, handset returns to active function window.
H ^ In Cycloid position, use Headphones or Loudspeaker
Note
for telephony; in portrait position use Earpiece & Mic.
^ When Headphones are not attached, press b to toggle
Earpiece and Loudspeaker.
H
Tip To answer calls by rotating Display from Cycloid to
portrait position, see P.10-31 "Turn Display to".
Incoming Calls in Cycloid Position
C Set 911SH to show incoming call notice or enable call functions
without interrupting TV (see P.6-25 "Calls & Alarms").
C Press f to answer calls without interrupting TV.
^ Use Headphones or Loudspeaker for telephony; use
Earpiece in portrait position (TV pauses).
^ TV audio is muted during calls.
^ When Calls & Alarms for incoming calls/Circle Talk
requests is set to Calls & Alarms, press r to toggle
between TV and Call windows.
C Placing handset in portrait position opens Call window (see
P.10-31 "Turn Display to").
^ Press r to toggle between TV and Call windows.
C To end the call, press g. (TV window returns.)
6
6-5