SoftBank 911SH Instruction Manual page 396

Accepting a Circle Talk Request
1
While handset is ringing/
vibrating, press u, f or N
Circle Talk starts.
C
To take the floor, see P.19-14.
Press g to exit
2
Floor counts appear and handset returns
to Standby.
H
Note To always accept Circle Talk requests automatically, set
Circle Talk availability (see P.19-8) to Auto Join. If Join
NG is set, Circle Talk requests are always rejected.
Adding/Cancelling Participants
Adding Participants
Follow these steps before starting Circle Talk or during
Circle Talk.
1 Press N x
Select Add Member and press b
2
19
19-16
3
From Hot Status Member List
1 Select Members List and press b
2 Use F to select a Group, then select a
member
From Circle Talk Member List
1 Select C/T Members List and press b
^ Only available during Circle Talk.
2 Select a member or Group
From Phone Book
1 Select Phone Book and press b
2 Select an entry
C For entries with multiple numbers, press b
one
Direct Entry
1 Select Enter Phone Number and press b
2 Enter a phone number
4 Press b
Selected member, Group or number is added.
^ To add more participants, repeat Steps 1 - 4.
A
Select