Table of Contents
Advertisement
Initiating a Call
2
See P.2-5 to initiate international calls from Japan, P.2-17 for Voice Calls from outside Japan and P.5-3 for Video Calls.
1
2
2-2
1
Confirm handset is on
^ Check signal strength (see P.1-9 1).
^ Handset will not transmit when P, U, b or
l appears (see P.20-4 - 20-6).
2
Enter a phone number
3
4
^ Include dialling code for all numbers.
H
^ Do not cover Microphone while talking.
Note
^ Avoid covering area over Internal Antenna.
^ Voice quality is affected depending on how and where handset is used.
H
^ Check Call Timers (see P.2-14) and Call Costs (see P.2-15).
Tip
^ For operations during a call (Loudspeaker, Mute, Hold, etc.), see P.2-11- 2-12.
^ Alternatively, enter a phone number and press N x to select Show My ID or Hide My ID.
3
Confirm the number and press f
Correcting Numbers
^ Use F to move cursor and press i to
delete the digit above the cursor. Move
cursor and press i for 1+ seconds to
delete the digits above and after the cursor.
^ Before moving cursor, press i for
1+ seconds to delete the entire number and
return to Standby.
^ If you misdial, press g to hang up and try
again.
Busy Numbers
^ Press g to end the call and try again later.
4
Press g to end call
^ Alternatively, close handset.
Advertisement
Table of Contents
