Table of Contents
Advertisement
Scanning during
Scan text during text entry and insert scan
Text Entry
results into current cursor position
In a text entry window, press N x
A
Press b
A
Scan
Select Text Scanner
A
Frame text in the centre of Display
A
Press b
Select a line
^ To change mode or edit scan results, see Step 4 on P.12-24.
Stopwatch
Record elapsed time for up to 24 hours (23 hours 59 minutes
59.9 seconds) in 0.1-second increments. Use lap time
feature to segment elapsed time.
^ Save times (including the last four lap times) to handset Text
Templates.
^ Stopwatch is disabled when battery is low. Stopwatch ends
when battery runs low.
H
A
Main Menu
Tools
Tools 2 (F)
1
Press b
Stopwatch starts.
C
To record Lap times, press N ,.
B The last four Lap times are recorded. The records are
deleted when Stopwatch is cancelled.
2
Press b to stop countdown
C
To save the records to Text Template, press N x
Select Save to Templates
B To check saved records, open Text Templates (see
P.12-27).
C
Press b to resume.
C
To clear the records, press N x
Press b
A
Select
A
Press b
A
Press b
A
A
Press b
A
Stopwatch
A
A
Press b
A
A
Select Reset
3
To exit, press i then choose Yes and press b
H
^ Records are deleted when Stopwatch is cancelled.
Tip
Save records to Text Templates.
^ Stopwatch setting is not affected by incoming calls. End
the call to return.
^ Alarm is disabled while Stopwatch window is open, but
is reactivated automatically when handset returns to
Standby.
Countdown Timer
Set Countdown Timer up to 60 minutes in 1-second
increments. Alarm Tone sounds and Small Light flashes
when set time elapses.
H
A
Main Menu
Tools
Tools 2 (F)
Enter time (00:01 - 60:00) and press b
1
^ To edit entered time, use F to move cursor and enter correct
time. If b is already pressed, follow the steps below.
^ When times over 60 minutes (60:00) are entered, the last set
time returns.
C
To change time, press N Z
2
Press b
Countdown starts.
A
Countdown Timer
A
A
Press b
Enter time
12
12-25
Advertisement
Table of Contents
