Table of Contents
Advertisement
Initiating Circle Talk
Follow the steps below to start Circle Talk from Standby.
When Register the circle talk member right now?
appears, see P.19-17 to create Circle Talk member list.
1
Enter a phone number
2
Press u (Circle Talk Key)
C
Adding/Cancelling Participants: see P.19-16
Press b -
3
^ Circle Talk starts when request is accepted by a receiver.
4
Speak
Initiator is the first speaker when Circle Talk starts.
^ Speaker's voice is heard by all other participants.
^ Speak for up to 30 seconds at one time.
^ Warning tone sounds five seconds before limit.
5
Press u when finished
^ The floor is released automatically when the time is up.
19
19-14
6
To speak again, press u while Press 5 to
speak appears
Press 5 when finish appears when you have the floor.
^ Busy appears if the floor is taken by another participants; try
again later.
Press g to exit
7
Floor counts appear and handset returns to Standby.
^ Circle Talk ends automatically when there is only one
participant left, including yourself.
Rejoining Circle Talk
C In Standby, press B/A to open Dialled Numbers/
A
Received Calls
Select the most recent Circle Talk
A
Press N x
record
Press b
^ An error message appears when all other participants have
exited or 11 participants are already engaged.
Loudspeaker On/Off
C Press b to toggle Loudspeaker on/off during Circle Talk.
^ To activate/cancel Loudspeaker when starting Circle Talk,
see P.19-18 "Loudspeaker".
A
A
Select Rejoin Circle Talk
Advertisement
Table of Contents
