C Continuous Shoot (Photo Camera) - SoftBank 911SH Instruction Manual

Table of Contents

Advertisement

C To release shutter manually during countdown, press b.
Image is captured or video recording starts and Self-timer is
cancelled.
C Incoming calls and Alarm interrupt countdown. (Self-timer
remains active.)
C Available functions during countdown are Digital Zoom,
Mobile Light and Exposure.
7
Continuous Shoot (Photo Camera)
Capture a series of 4 or 9 separate images automatically
with a single press of the Shutter Key. Select from three
speed settings or choose the manual option to control the
rate at which images are captured.
1
4 Pictures
Capture four separate images with Index Image
3
9 Pictures
Capture nine separate images with Index Image
3
Overlapped
Capture five images to create a composite image
1
Available when Picture Size is VGA (480 x 640), Standby (240 x
400), For Msg. (240 x 320) or For Msg. (120 x 160). (Index image is
not created for VGA.)
2
Index Image consists of reduced images of each shot.
3
Available when Picture Size is Standby (240 x 400), For Msg. (240 x
320) or For Msg. (120 x 160).
^ Press b for the first shot. Handset captures the rest
automatically.
7-12
Self-timer Details
^ In 4 Pictures or 9 Pictures mode, select shutter interval from
three levels, or select Manual to release shutter manually.
^ Switch to External Camera to use Continuous Shoot.
^ Follow these steps before capturing an image (after Step 1 on P.7-6).
1
Press N x
2
Select Modes and press b
3
Select Continuous Shoot and press b
4
Select from 4 Pictures to Overlapped and press b
C
To cancel, choose Off
5
Select speed and press b
Viewfinder returns with the corresponding indicator (see P.7-3).
^ Manual is not available when Self-timer (see P.7-11) is active.
^ Available shooting speed options vary by selected Picture
Size.
2
6
Frame image on Display and press b
2
The first frame is captured with subsequent frames captured at
selected speed.
^ For manual control (4 Pictures and 9 Pictures modes), repeat
Step 6 for each frame.
C
To stop before capturing all frames, press M 3.
B To save captured images, skip ahead to Step 8.
B To discard captured images, press i. (Viewfinder returns
with Continuous Shoot active.)
A
Press b (Omit the next steps.)

Advertisement

Table of Contents
loading

Table of Contents