2.2.11 Wall Mounting (AC Adaptor)
2.2.11 Wall Mounting (AC Adaptor)
Mounting on Wooden Wall
WARNING
Only use the wall-mounting equipment (screws, washers) included with the PBX.
Notice
Be careful not to drop the AC adaptor.
1.
Place the reference for wall mounting (on the following page) on the wall to mark the 2 screw positions.
2.
Install the screws and washers (included) in the wall.
Washer
Drive the screw
to this position.
Note
•
Make sure that the screw heads are at the same distance from the wall.
•
Install the screws perpendicular to the wall.
3.
Hook the AC adaptor on the screw heads.
62
Installation Manual
110 mm