Panasonic KX-TDA30 Installation Manual page 147

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA30:
Table of Contents

Advertisement

Using the KX-TD7590
Press POWER
for 5 seconds.
To register for the first time
/
Select
"INITIAL SETTING".
OR
To re-register
SELECT
/
Select
"PS-PROGRAM".
SELECT
/
Select
"REGISTRATION".
To set system lock
/
Choose
"ENABLE/DISABLE".
System Lock Password
4 digits
Using the KX-TD7580
Press POWER
for 2 seconds.
/
Select
"Register H/set".
Setting the Personal Identification Number (PIN) for PS Registration
To prevent registering the PS to a wrong PBX, a PIN for PS registration can be set to the PBX. Before registering
the PS to the PBX, enter the PIN set to the PBX into the PS. By doing so, the PS will only be registered to the
PBX with the matching PIN.
Note
By default, the PIN for PS registration is "1234" for both the PBX and PS. Therefore, the PS can be
registered to the PBX without setting the PIN.
The PIN for PS registration will only be used when registering the PS to the PBX. Therefore, during
normal operation after registration, even if there is more than 1 PBX with the same PIN near the PS,
the PS will not be inadvertently linked to a different PBX.
Setting the PIN for PBX
[692]
ENTER
F
F
SELECT
SELECT
/
Select "DECT-
SYS SETTING".
SELECT
/
Select
"DECT-SYS1-4"
SELECT
System Lock Password
ENABLE
DISABLE
/OK
/
Select
"Setting Handset".
/
Select
"Base 1–4".
PIN for PS Registration
4 digits
1234
2.7.7 Connecting a Cell Station to the PBX
If required
System Lock Password
4 digits
PIN for
PS Registration
4 digits
4 digits
/
Select
"Registration".
PIN for
PS Registration
4 digits
ENTER
/OK
/OK
C.Tone
/OK
C.Tone
END
(HOLD)
Installation Manual
147

Advertisement

Table of Contents
loading

Table of Contents