Wall Mounting (Ac Adaptor) - Panasonic KX-TDA15 Installation Manual

2.2 Installation of the Hybrid IP-PBX
2.2.9

Wall Mounting (AC Adaptor)

Mounting on Wooden Wall
1.
Place the reference for wall mounting (on the following page) on the wall to mark the 2
screw positions.
2.
Install the screws and washers (included) in the wall.
Washer
Drive the screw
to this position.
Notes
• Make sure that the screw heads are at the same distance from the wall.
• Install the screws perpendicular to the wall.
3.
Hook the AC adaptor on the screw heads.
Note
Be careful not to drop the AC adaptor.
48 Installation Manual
110 mm