Panasonic KX-TDA30 Installation Manual page 146

2.7.7 Connecting a Cell Station to the PBX
Registering the PS
The PS must be registered to the PBX before it can be used. Programming of both the PS and PBX is required.
A PT with multiline display (e.g., KX-T7636 6-line display) is required to perform the PBX system programming.
Note
For details about system programming using a PT, refer to "2.3.2 PT Programming" in the Feature
Guide, and "2.1 PT Programming" in the PT Programming Manual.
Entering the PBX System Programming Mode Using a PT
Administrator Level
PROGRAM/
PAUSE
Note
means default value.
PS Registration
One PS can be registered to a maximum of 4 different PBXs.
[690]
ENTER
Using the KX-TCA155/KX-TCA255/KX-TCA256/KX-TCA355
Press POWER
for 2 seconds.
Select
"Register H/set".
"Enter Base PIN".
System lock can be set after PS registration. When system lock is enabled, the system lock password will be
required for system setting.
146 Installation Manual
System Password for Administrator—
#
for PT Programming
PS No.
Extn. No.
001 to 028 1 to 4 digits
Select
"Setting Handset".
Select
"Base 1–4".
PIN for PS Registration
4 digits
= 1234
ENTER
Select
"Registration".
"Please wait".
Programming No.
3 digits
To the PS
operation
END
below
(HOLD)
C.Tone