Specifying Software Switch Settings - Konica Minolta bizhub C200 Network Administration Manual

Specifying machine functions (software switch settings)
3.2

Specifying software switch settings

Follow the procedure described below to specify the software switch settings.
1
In the Administrator Management screen, touch
– For details on displaying the Administrator Management screen, refer to "Displaying the Network
Settings screen" on page 2-3.
2
In the Administrator Management screen, touch [Software Switch Setting].
3
Touch [Mode Selection], and then use the keypad to type in the mode number.
4
Touch either [Bit Selection] or [HEX Selection], and then specify the setting.
– To specify the bits, touch [Bit Selection], touch
changed, use the keypad to specify the bit, and then touch [Apply].
bizhub C200
to display the next page.
or to move the cursor to the bit to be
3
3-5