Leica mojo 3D User Manual page 42

Leica mojo3D, Running the mojo3D for the First Time
Implement setup,
step-by-step
To add an implement carry out the following steps:
1. On the vehicle setup screen, tap
An implement button appears in the bar at the top of the screen
and the list of implement types are shown.
2. Tap the implement type in the list at the left of the screen. Tap
to reveal more options.
3. Enter the measurements required for the implement type that you have selected.
• Tap on a field. The on-screen keyboard appears.
• Use the on-screen keyboard to enter data, tap
• Repeat for all measurements required.
4. If more implements are required, tap
settings for the vehicle or implements already set up, tap the relevant button in
the top bar.
5. After you have entered all the required settings, tap
.
to continue.
to add another implement. To change
42
and
to continue.