Leica mojo 3D User Manual page 207

Leica mojo3D, Correction Sources
8. Select a stream by tapping its name. Information about the stream appears on
the right side of the screen.

The distance to the reference source shown on the right is a guide only and
may be incorrect. Some servers provide a virtual correction location that
can only be assigned to a location close to you once you have connected
to the data stream. Until that time, the reported distance is meaningless.
9. Once a stream is selected, tap the
10. If all details are entered correctly,
the system attempts to connect to
the correction source. This may take
some time and if successful the
Correction Source Status screen
appears with a
Correction Source Status.
11. If the connection was successful, tap
uration and begin using the system. You are returned to the main navigation
screen.
button.
in front of
to complete the Network DGPS config-
207