Leica mojo3D, Field Boundary
Exporting field
boundary data,
step-by-step
To export all field boundary data stored in the mojo3D in a mojo3D file format, carry
out the following steps:
1. The USB interface is on the lower left front of the
mojo3D display. Lift the rubber cover and insert a
compatible USB Flash Drive into the USB slot.
2. On the main navigation screen, tap the settings button.
3. On the flyout menu, tap the transfer data button.
4. Tap the export to USB button and tap
mojo3D_010
to continue.
164