Leica mojo 3D User Manual page 239


Leica mojo3D, Virtual Wrench™ Remote Service
2. On the main navigation screen, tap the service button.
3. On the flyout menu, tap the upgrade from USB button.
4. Tap on the item to upgrade. mojo3D or mojoXact (if connected).
Tap to continue.
5. Tap on the software version in the list to select it. Tap
6. Both progress bars (Current Stage and Overall Progress) will be completely full
when the installation is complete.
• The mojo3D or mojoXact will automatically restart when the installation is
complete.
• Remove the USB Flash Drive only when the unit is powered down.
to start the install.
239