9.1
General Informa-
tion
Saving a vehicle or
implement config-
uration, step-by
step
Leica mojo3D, Vehicles and Implements
Saving a Vehicle or Implement Configuration
You must have a working configuration, including vehicle, implement and section
control, before you can save it.
To save a vehicle or implement configuration, carry out the following steps:
1. On the main navigation screen, tap the settings button.
2. On the flyout menu, tap the vehicle setup management button.
The Vehicle Setup Management screen, shown below, displays.
The Vehicle list (on the left) is empty if you have no previously
saved configurations.
179