Leica mojo 3D User Manual page 223

Leica mojo3D, Correction Sources
8. If the connection was successful, tap
back screen.
If the connection was not successful (as indicated by a
Source Status), tap the
9. On the Enable GL1DE
system use the GL1DE
correction source fails, by tapping the Enable GL1DE
green.
TM
• GL1DE Fallback Time Limit is the time in minutes that the system will use the
TM
GL1DE correction source. If the RTK Base Station correction source has not
come back online in this time period, then auto-steer is disabled.
• Drift Limit - if the RTK Base Station correction source comes back online and
the drift from the wayline is less than this value (in meters) then auto-steer
remains enabled. However, if the drift from the wayline is greater than this
value, then auto-steer is disabled.
10. Select or deselect Enable GL1DE
11. Tap to complete the RTK Base Station configuration and begin using the
system. You are returned to the main navigation screen.
button to go back and make the necessary changes.
TM
Fallback screen the operator can choose to have the
TM
correction source in the event that the RTK Base Station
TM
Fallback.
to proceed to the Enable GL1DE Fall-
in front of Correction
TM
Fallback box so it turns
223