Leica mojo 3D User Manual page 323

Mount the GeoPRO
antenna
Leica mojo3D, mojo3D Enhancements
.
GeoPRO_003
1. Use the supplied cleaning wipes to clean the installation area.
2. Remove the protective strip on the double-sided tape.

Be careful removing the backing tape from the sticking blocks. Make sure
that you only peel off the tape and do not rip the adhesive from the
backing tape.
3. Mount the GeoPRO antenna on the vehicle roof.

Keep in mind that the GeoPRO antenna should mount with the whip
antenna in the forward position.
2
3
323