Ricoh C23535 Operating Instructions Manual page 441

Message
Exceeded time
limit for LDAP
server search.
Check the server
status.
The specified
group contains
some destina-
tion(s) that do
not have access
privileges. Do
you want to se-
lect only the
privileged desti-
nation(s)?
Cannot find the
specified path.
Please check the
settings.
Sender has not
been specified.
E-mail address
entered is not
correct. Please
re-enter.
You do not have
the privileges to
use this func-
tion.
Authentication
has failed.
Authentication
has failed.
Cause
A network error has oc-
curred and connection
has failed.
The specified group con-
tains some destinations
for sending by e-mail and
some destinations for
sending by Scan to Folder.
The name of the comput-
er or folder entered as the
destination is wrong.
The sender has not been
specified.
The entered e-mail ad-
dress is wrong.
Use of this function is re-
stricted.
Wrong login user name
or password.
Authentication is not
possible from this ma-
chine.
When a Message Appears
Solution
Try the operation once more. If the mes-
sage is still shown, the network may be
crowded. Check the information of
[System Settings]. See "System Settings",
General Settings Guide.
To select destinations for sending by e-
mail, press [Select] for the message dis-
played on the e-mail screen. To select
destination for sending by Scan to Fold-
er, press [Select] for the message dis-
played on the Scan to Folder screen.
Check whether the computer name and
the folder name for the destination are
correct.
A sender's name should be specified
before sending e-mail. Send e-mail after
specifying the sender's name.
Make sure the e-mail address is correct,
and then enter it again.
Contact the administrator.
Confirm correct login user name or
password.
Contact the administrator.
3
35