Unusable Paper - Ricoh C23535 Operating Instructions Manual

Appendix
❒ If you load paper of the same size in the same orientation in two or more
trays, the machine automatically shifts to the other tray - except the bypass
tray - when the first tray in use runs out of paper. This function is called "Auto
Tray Switching". (However, if one tray has recycled or special paper, the set-
tings of the other trays must be the same for Auto Tray Switching to work.)
This saves interrupting a copy run to replenish paper when making a large
number of copies. See "Copier / Document Server Features", and "Tray Pa-
per Settings", General Settings Guide.

Unusable Paper

3
This section describes paper unusable on this machine.
R CAUTION:
• Do not use aluminum foil, carbon paper, or similar conductive paper to
avoid a fire or machine failure.
Important
❒ To prevent faults, do not use any of the following kinds of treated paper:
• Paper for inkjet printers
• Thermal fax paper
• Art paper
• Aluminum foil
• Carbon paper
• Conductive paper
• Paper with perforated lines
• Hemmed-edge paper
• Tab stock
❒ Faults can occur if you copy onto sides that are already printed. Take care to
copy onto unprinted sides only.
To prevent misfeeds, do not use the following kinds of paper:
• Bent, folded, or creased paper
• Perforated paper
• Slippery paper
• Torn paper
• Rough paper
• Thin paper with little stiffness
• Paper with a dusty surface
If you copy onto rough grain paper, the image might be blurred.
Do not reuse copy paper that has been already copied or printed onto.
52