Ricoh C23535 Operating Instructions Manual page 329

D
Check that [Program / Change] is selected.
E
Select the name whose folder you want to change, and then press [Folder].
Press the name key, or enter the registered number using the number keys.
You can search by the registered name, fax number, folder name, e-mail address,
or IP-Fax destination.
F
Press [Folder].
G
Select the items you want to change.
H
Press [Connection Test] to check the path is set correctly.
I
Press [OK].
J
Press [Exit].
Note
❒ To change the name, key display and title, see "Changing a Registered Name".
Reference
p.212 "Changing a Registered Name"
To change the protocol
A
Press [SMB], or [NCP].
B
A confirmation message appears. Press [Yes].
Changing the protocol will clear all settings made under the previous protocol.
C
Enter each item again.
Reference
p.240 "Registering an SMB Folder"
Registering Folders
249
7