Fuel Unit - Sym Joyride 125 Service Manual

18. Electrical System

Fuel Unit

Open the seat.
Remove the luggage box (bolt x 6, screw x 1).
Remove the rear carrier (bolt x 3).
Remove the rear carrier seat (bolt x 2).
Remove the rear center cover (screw x 4).
Remove the left and right rear foot rest (bolt
x1).
Remove the left and right side cover (screw x
4).
Remove the central cover (screw x 6).
Remove the left and right body cover, the
center cover (screw x 4, bolt x 4).
Remove the foot rest (bolt x 4, screw x 4).
Disconnect the terminals of the fuel unit.
Remove the fuel unit (screw x 4).
Caution
Great care shall be taken not to damage
or bend the float arm of the fuel unit.
Float location
Upper
Lower
Turn on the main switch.
Move the fuel unit float up and down to check
if the fuel gauge works properly.
Float location
Upper
Lower
Caution
While conducting the test, turn on the
direction indication lamp to make sure that
the battery is in serviceable condition.
18-20
To this chapter contents
Resistance
97.5~107.5 Ω
4~10 Ω
Fuel gauge
Full
Empty
2 bolts
Fuel pump / fuel unit coupler
5 bolts
Full
Empty