Engine Installation
Check if the bushings of engine suspension
parts and shock absorber for damage.
Install engine in the reverse procedures of
removal.
Caution
Pay attention to foot & hand safety as engine
●
installation to avoid hurting.
Do not bend or twist wires.
●
Cables wires have to be routed in
●
accordance with original layout.
Small-end bearing ring has to forward to
●
inside (bearing) as assembling the swing
arm.
Torque value:
Engine hanger locknut
Rear cushion upper bolt
Rear cushion lower bolt
Rear wheel shaft locknut
To this chapter contents
4.0~5.0kgf-m
3.5~4.5kgf-m
2.4~3.0kgf-m
11.0~13.0kgf-m
6. ENGINE REMOVAL
6-13