17. Muffler / Rear Wheel / Rear Cushion
Precautions in Operation
General
Please refer to the Maintenance Manual for tubeless tire in respect to the removal, repair and
installation of the tires.
Service data
Run-out of rear rim
Thickness of rear brake lining
Free length of rear shock absorber
Torque Value
Rear shaft nut
Rear brake calliper bolt
Rear cushion upper bolt
Troubleshooting
Run-out of rear wheel
Deformed or bent wheel
hub.
Improper tires.
Loose wheel shaft.
Soft Shock Absorber
The spring is too weak.
17-2
To this chapter contents
Item
Radial
Axial
10.0-12.0 kgf-m
2.9-3.5 kgf-m
3.5-4.5 kgf-m
Noisy Brake
Worn brake lining.
Offset brake disc.
Improper assembly of brake
caliper.
Brake disc or wheel
imbalance.
Standard
-
-
4.0
238.6
Rear cushion bolt
Exhaust pipe attaching nut
Exhaust pipe attaching bolt 2.7-3.3 kgf-m
Poor Performance of Brake
Improperly adjusted brake.
Contaminated brake disc.
Worn brake lining.
Air inside brake fluid pipe.
Grease on brake disc.
The brake fluid piping is
clogged.
The brake fluid pipe is
deformed or bent.
Insufficient amount of brake
fluid in the reservoir.
Unit: mm
Allowable Limit
2.0
2.0
3.0
233.6
2.4-3.0 kgf-m
1.0~1.2 kgf-m