Engine Hanger - Sym Joyride 125 Service Manual

To this chapter contents
6. Engine Removal
Remove the left rear cushion lower bolt.
Bolt
Remove the engine hanger lock bolts from the
Frame side bolt
frame side.
Remove the engine and hanger.
Engine side bolt

Engine Hanger

Removal
Remove the engine hanger bolts from the engine
side.
Check if the engine hanger rubber bush is
damaged or not.
Replace it if necessary.
Installation
Install the engine hanger onto the engine and
make sure the locknut and bolt are locked
properly.
Torque value : 4.0~5.0kgf-m
6-11