Fuel Unit - Sym Fiddle III 50 Service Manual

16. ELECTRICAL EQUIPMENT

FUEL UNIT

Open the seat.
Remove the luggage box(bolts x 4) .
Remove the R.R. carrier(bolts x 3) .
Remove the body cover.
Disconnect the fuel unit wire connector.
Caution
Do not damage or bend the float arm as
removing.
The resistance values are listed below when
the float arm in "F" and "E" positions.
Float arm position
E(empty)
F(full)
DOWN(empty)Connect the fuel unit to the
main harness.
Turn the main switch "ON" position.
Move the float arm in "UP" & "DOWN", and
then check if the fuel unit indication needle is
in correct position.
Caution
Turn on the turn signal light to make sure
battery is in good condition before this test.
Float arm position
UP(full)
DOWN(empty)
Installation
Install the fuel unit in reverse order of removal.
16-22
Resistance value
97.5~107.5
4~10
Indicator needle
E(empty)
F(full)
Fuel unit wire connector
SYM
Fuel unit
UP
(full)
DOWN
(empty)