Creating An Ftp Shortcut Using The Touch Screen; Understanding Ftp Options; Original Size; Sides (Duplex) - Ricoh M126 Service Manual

Creating an FTP shortcut using the touch screen

1
On the home screen, touch FTP.
2
Type the address of the FTP site.
3
Touch Save as Shortcut.
4
Enter a name for the shortcut.
5
Verify that the shortcut name and number are correct, and then touch OK. If the name or number is incorrect, then
touch Cancel, and then reenter the information.
If you enter a number that is already in use, then you are prompted to select another number.
6
Touch Send It to start the scan, or touch

Understanding FTP options

Original Size

This option opens a screen where you can choose the size of the documents you are going to scan.
•
Touch a paper size button to select that size as the Original Size setting. The FTP screen appears with your new
setting displayed.
• When Original Size is set to Mixed Sizes, you can scan an original document that contains mixed paper sizes.

Sides (Duplex)

This option informs the printer if the original document is simplex (printed on one side) or duplex (printed on both
sides). This lets the scanner know what needs to be scanned for inclusion in the document.

Orientation

This option tells the printer whether the original document is in portrait or landscape orientation and then changes the
Sides and Binding settings to match the original document orientation.

Binding

Tells the printer whether the original document is bound on the long-edge or short-edge side.

Resolution

This option adjusts the output quality of your file. Increasing the image resolution increases the file size and the time
needed to scan your original document. Image resolution can be decreased to reduce the file size.
to return to the home screen.
Scanning to an FTP address
144