[Ipsec] - Olivetti d-COLOR MF3300 Functions And Operating Instructions

1

[IPsec]

The IPsec technology prevents the falsification or leakage of data on the IP packet basis using encryption
technology.
Configure the settings if IPsec is installed in your environment.
1
In the administrator mode, select [Security] - [IPsec] - [IPsec], then click [Edit] in [IPsec Settings].
The [IPsec Settings] screen appears.
2
Click [Edit] from [IKEv1] or [IKEv2] on the [IPsec Settings] screen, then configure the following settings.
Item
[Encryption Algorithm]
[Authentication Algo-
rithm]
[Encryption Key Valid-
ity Period]
[Diffie-Hellman Group]
[Negotiation Mode]
3
Click [Edit] from [SA] on the [IPsec Settings] screen, then register the Security Association (SA).
% Up to 10 groups can be registered for the [SA].
Item
[Name]
[Encapsulation Mode]
[Security Protocol]
[Key Exchange Meth-
od]
[Tunnel End Point]
[IKE Settings]
1-36
Available operations in Administrator mode
Description
Select the encryption algorithm used for generating a common key used
in communication.
Select the authentication algorithm used for generating a common key
used in communication.
Enter a validation period of a common key used for encrypted communi-
cation.
When this period has expired, a new key is created. This can secure the
communication.
[28800] sec. is specified by default.
Select the Diffie-Hellman group.
[Group 2] is specified by default.
Select the method to securely generate a common key used for encrypted
communication.
[Main Mode] is selected by default.
Description
Enter the SA name (using up to 10 characters).
Select an IPsec operation mode.
[Transport] is specified by default.
Select a security protocol.
[AH] is specified by default.
Select the key replacement method to securely create a common key
used to encrypt communications.
[IKEv1] is specified by default.
Enter the IP address of the peer's IPsec gateway.
This is required when [Tunnel] is selected in [Encapsulation Mode].
Configure IKE settings used for this SA.
This is required when [IKEv1] or [IKEv2] is selected in [Key Exchange
Method].
1.5
d-Color MF 3300/3800