[Date/Time Settings] - [Time Adjustment Settings]; [Date/Time Settings] - [Daylight Saving Time Settings] - Olivetti d-COLOR MF3300 Functions And Operating Instructions

1.5 Available operations in Administrator mode

[Date/Time Settings] - [Time Adjustment Settings]

To display: Administrator mode - [System] - [Date/Time Settings] - [Time Adjustment Settings]
Using the NTP (Network Time Protocol) server, you can automatically adjust the date and time of this ma-
chine.
Register the NTP server used. To periodically adjust the date and time by connecting to the NTP server, spec-
ify an interval for adjusting the date and time.
Item
[Time Adjustment]
[NTP Server Address]
[Port Number]
[Time Zone]
[Adjustment Time]
Tips
If time zone is specified, the standard time obtained from the server adjusted to your time zone is specified
as the correction time.

[Date/Time Settings] - [Daylight Saving Time Settings]

To display: Administrator mode - [System] - [Date/Time Settings] - [Daylight Saving Time Settings]
Specifies daylight saving time for the current country setting.
Item
[Daylight Saving Time]
d-Color MF 3300/3800
Description
To automatically adjust the date and time of this machine using the NTP server,
select [Enable].
[Disable] is specified by default.
Enter the NTP server address.
Use one of the following formats.
• Example of host name entry: "host.example.com"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
If necessary, change the NTP server port number.
Normally, you can use the original port number.
[123] is specified by default.
Select a time zone (time difference from world standard time) to suit your en-
vironment.
[GMT] is specified by default.
Displays the latest date and time at which time correction was performed by
connecting to the NTP server.
Description
Select [Enable] to use daylight saving time.
Also enter the time to be adjusted for daylight saving time (in minutes).
[Disable] is specified by default.
1
1-17