Registering User Authentication Information - Olivetti d-COLOR MF3300 Functions And Operating Instructions

6
11
When the installation is complete, click [Close].
Then, install Data Administrator PlugIn for IC Card Authentication Unit AU-201.
12
Click setup.exe of Data Administrator PlugIn.
13
If necessary, select the setup language, and click [OK].
14
Follow the on-screen instructions to proceed the installation.
15
Click [Next].
16
Select [I accept the terms in the license agreement], then click [Next].
17
Click [Install].
18
When the installation is complete, click [Finish].
This completes the installation of Data Administrator PlugIn for IC Card Authentication Unit
AU-201, which completes the setup.

Registering user authentication information

0
To register user authentication information with Data Administrator, connect the authentication unit to
the computer's USB port, and also connect the computer to this machine via network.
1
Turn on the Power Switch of this machine.
2
Start Data Administrator, and import device information of this machine.
% Restart the procedure five or more seconds after connecting the authentication unit.
% For details about how to import device information, refer to the relevant Data Administrator man-
ual.
3
In [Function selection], select [Authentication Settings] - [User authentication settings], and then click
[Add].
4
Select a user template, and click [OK].
% For details on templates, refer to the relevant Data Administrator manual.
The User Registration screen appears.
5
Enter the user name and password, and select the [IC card authentication] tab.
6
Place the IC card on the authentication unit, then click [Start reading].
% You can also register the card by directly entering the card ID.
7
Click [OK], and register authentication information of the next user.
8
After the registration of authentication information has been completed for all users, click [Export to the
device].
% When necessary, select a user name, and click [Edit] to change registered information.
9
Click [Write].
% Data Administrator supports the batch copy function. If necessary, you can collectively write the
registered authentication information to multiple devices.
10
When writing to this machine has finished, click [OK].
11
Disconnect the authentication unit from the computer's USB port.
NOTICE
When connecting or disconnecting the USB cable, hold the plug. Otherwise, the machine may be dam-
aged or a failure may occur.
6-6
Operations required to use this function (for Administrators) 6.2
d-Color MF 3300/3800