Obtain Nw User Property - Kyocera ECOSYS M3040idn Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
2
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and press [Login].
The factory default login user name and login password are set as shown below.
Model Name
ECOSYS M3040idn/
ECOSYS M3540idn
ECOSYS M3550idn
ECOSYS M3560idn
3
Press [User Login Setting], [
Configure the settings.
System Menu/Counter.
Obtain NW User... - LDAP Server Information
Server Name 192.181.11.11
Port
389
Name 1 displayName
Name 2
Cancel < Back
1
Press [Server Name].
2
Enter the LDAP server name or the IP address and press [OK].
3
Press [Port].
4
Press [# Keys] to enter the LDAP port number using the numeric keys.
5
Press [Name 1].
6
Enter the LDAP Attribute to obtain the user name to be displayed and press [OK].
7
Similar to steps 5 and 6, set [Name 2].
8
If you set the server type to "Kerberos", press [Authentication Type] and set the
authentication method.
9
Press [E-mail Address].
10
Enter the LDAP Attribute to obtain the E-mail address and press [OK].
11
Press [Search Timeout] to set the amount of time to wait before time-out.
12
Press [+], [-] or the numeric keys to enter the time and press [OK].
13
Press [OK].
Login User Name
4000
5000
6000
], [Obtain NW User Property] and then [On].
10:10
1/2
OK
9-24
Login Password
4000
5000
6000