Simple Login Settings - Kyocera ECOSYS M3040idn Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration

Simple Login Settings

The simple login function allows users to log in simply by selecting a user name. Users must be registered in advance to
use this functionality.
NOTE
• For user registration, refer to
• To use Simple Login, User Login Administration must be enabled in
3.
Simple Login
Select whether or not simple login is enabled.
1
2
Adding a User (Local User List) on page
Display the screen.
1
Press the [System Menu/Counter] key.
2
Press [ ] and then [User Login/Job Accounting].
System Menu/Counter.
System Menu
Favorites/Application
Internet
2
Address Book/One Touch
User Login/Job Accounting
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and press [Login].
The factory default login user name and login password are set as shown below.
Model Name
ECOSYS M3040idn/
ECOSYS M3540idn
ECOSYS M3550idn
ECOSYS M3560idn
3
Press [User Login Setting], [Simple Login Settings] and then [Simple Login].
Press [On] or [Off].
9-5.
Enabling User Login Administration on page 9-
10:10
4/5
1
Close
Login User Name
4000
5000
6000
9-25
Login Password
4000
5000
6000