Installing and Setting up the Machine > Command Center RX
Changing Device Information
Change the device information of the machine.
1
Display the screen.
1
Launch your Web browser.
2
In the address or location bar, enter the machine's IP address or the host name.
Press [Device Information] in the home screen and then [Identification/Network] to check the
machine's IP address or the host name.
Device Information
3
Log in with administrator privileges.
The factory default setting for the default user with administrator privileges is shown below.
* Upper case and lower case letters are distinguished (case sensitive).
4
From the
[Device
Settings] menu, select [System].
1
2
Identification/Network
Login User Name
Login Password
3
2-39
Admin
Admin