Adjustment/Maintenance - Kyocera ECOSYS M3040idn Operation Manual

Setup and Registration (System Menu) > System Menu

Adjustment/Maintenance

System/Network
Adjust printing quality and conduct machine maintenance.
Item
Quiet Mode Settings
Quiet Mode
Specify for Each Job
Density Adjustment
Copy
Send/Box
Background Density Adj.
Copy (Auto)
Send/Box (Auto)
Print Density
Auto Color Correction
Correcting Black Line
Display Brightness

Adjustment/Maintenance

Lower print and scan speed for quiet processing.
Set the Quiet Mode. Select this mode when the running noise is uncomfortable.
Value: Off, On
It is possible to set the use of Quiet Mode for each job, such as copying and sending. Set
whether or not to permit the setting for each job.
Value: Permit, Prohibit
Adjust density.
Adjust copy density. Adjustment can be made in 7 levels.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Adjust scan density when sending or storing the data in Document Box. Adjustment can be
made in 7 levels.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Darkens or lightens overall background density adjustment.
Darkens or lightens overall background density adjustment during copying. Adjustment can be
made in 7 levels.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Darkens or lightens overall background density when sending images or storing them in the
Document Box. Adjustment can be made in 7 levels.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Adjust print density. Adjustment can be made in 5 levels.
Value: 1 to 5
This setting allows you to adjust the detection level used by the machine to determine whether
the original is color or black and white during Auto Color Mode. Setting a lower value will result
in more originals being identified as color, while a larger value will tend to increase the number
of originals being identified as black and white.
Value: 1 (Color), 2, 3, 4, 5 (B & W)
Correct fine lines (streaks caused by contamination), which may appear on the image, when
the document processor is used.
Value
Off: No correction performed. Select this when you want to reproduce fine lines in the
original more clearly than with [On (Low)].
On (Low): Correction performed.
On (High): Select this item if a streak remains after using [On (Low)]. The reproduction
of fine lines on the original may become lighter than when using On (Low).
Set the brightness of the touch panel.
Value: 1 (Darker), 2, 3, 4, 5 (Lighter)
8-40
Description