File Name Entry; Priority Override; Quiet Mode - Kyocera ECOSYS M3040idn Operation Manual

Using Various Functions > Functions

File Name Entry

Print from
Copy
Send
Box
Adds a file name. Additional information such as job number and date and time can also be set. You can check a job
history or job status using the file name, date and time, or job number specified here.
Enter the file name (
up to 32 characters)
To add date and time, press [Date and Time]. To add job number, press [Job No.]. To add both, select [Job No. + Date]
or [Date + Job No.].

Priority Override

Print from Print from
Copy
Box USB
Suspends the current job and gives a new job top priority. The suspended job resumes after the other job is finished.
(Value: [Off] / [On])
NOTE
• This function is not available if current job was an override.
• Priority override may not be available depending on the status of the current print job and memory usage.

Quiet Mode

Print from Print from
Copy
Box USB
Lower print and scan speed for quiet processing. Select this mode when the running noise is uncomfortable.
It is possible to set the use of Quiet Mode for each function, such as copying and sending.
(Value: [Off] / [On])
NOTE
• The processing speed will be slower than normal when in Quiet Mode.
• This cannot be used when [Prohibit] is set for
Scan to
USB
, and press [Next].
Scan to
Send
USB
Specify for Each Job on page 8-40.
6-21