Collate/Uncollate Output To The Secondary (Sub) Tray - Oce CS655 Pro User Manual

Hide thumbs Also See for CS655 Pro:

Table of Contents

Output applications

Collate/uncollate output to the secondary (sub) tray

A machine with Finisher FS-520 installed is set to Collate output to the primary (main) tray by default,

regardless of whether or not to be equipped with other optional devices. Change the output tray and select

the desired output mode by following the procedure below.

For detailed specifications, see page 3-3 and page 7-5.

Position the original.

Touch [Output Appli.] on the Copy Screen.

The Output Application Screen will be displayed.

Select the secondary (sub) tray as the output tray.

Touch [Output Tray] to display the Output Tray Selection Screen.

Touch the tray position key

of the secondary (sub) tray to highlight it, then touch [OK].