Application functions
11.3
Locating title pages on the right side: Chapters
Chapter is used with ADF in 1-2 mode for the purpose of locating title pages on the right side, rather than
reverse side, of a duplex copy to improve the presentation of double-sided copies.
To effectively locate the title page on the right, a blank sheet will be automatically created on the reverse side
of a sheet, if required.
e.g. Specifying pages 2 and 5 as title pages:
Simplex/Duplex
1%2
1%2 + Print Insertion
2%2
2%2 + Print Insertion
0
Use ADF. Use Separate Scan mode if original count exceeds 100 or if original glass is desired for
scanning the original. See page 9-16 for details.
0
Max. title pages: 30 sheets, from 1 ~ 999
0
The chapter page can be copied on the sheet from another tray source. (Print Insertion)
0
Use Stamp together with this function to print chapter number onto chapter page in addition to page
number, numbering, or watermark numbering.
CS655 Pro
Description
A blank page is automatically added before the 2nd and 5th pages of the original, so that
they will be printed on the front side of double-sided copies.
The same page insertion is performed as above, and the chapter pages (2/3 and 5/6) will
be printed on paper from another tray source.
Since one double-sided original sheet is counted as two pages, the copy result will be
exactly the same as above in 1%2 mode with None selected for Chapter paper.
The same page insertion is performed as above, and the chapter pages (2/3 and 5/6) will
be printed on paper from another tray source.
11
11-11