13
13.4.2
Recalling stored job settings
Follow the procedure below to recall jobs that are already stored.
0
The Mode Memory Screen can be displayed only from the Copy Screen. If any other screen such as
Machine Status Screen is displayed, pressing [Mode Memory] will be ignored.
1
Position the original.
2
Touch [Copy] tab to display the Copy Screen, then press
[Mode Memory] on the control panel.
The Mode Memory Screen will be displayed.
3
Touch a job number key to select a job you want to recall.
–
The job keys numbered from 01 to 18 are displayed on the screen. Touching [Next] will display the
keys from 19 to 30.
–
The desired job can also be selected by entering two-digit number from the control panel keypad.
4
Touch [Job Check].
The Job Recall Check Screen displays to enable you to review the settings.
5
Review the settings, then touch [OK].
The settings of the selected job will be recalled on the restored Copy Screen.
6
Press [Start] to print.
13-10
Advanced information
CS655 Pro