Zoom; Copying In 1.000 Magnification Mode - Oce CS655 Pro User Manual

Basic job settings
9.4

Zoom

In the initial settings on the Copy Screen, the magnification is automatically set at 1.000 (full size).
This section describes how to change the magnification ratio.
9.4.1

Copying in 1.000 magnification mode

Follow this procedure to make a 100% copy of the original image.
1
Press [Reset] on the control panel. If the machine is equipped with the ADF, close it securely before
pressing [Reset].
– The initial setting will be restored. Check that [e1.0] is highlighted to indicate that the 1.000
magnification is selected.
2
Select additional copy conditions, as desired.
– Specifying paper size will release 1.000 magnification and set Auto Zoom automatically. In this case,
touch [e1.0] to highlight it again.
!
Detail
The initial settings may be altered by the machine manager. Details can be referred in the User's guide
– POD Administrator's reference.
CS655 Pro
9
9-19