Loading Tabbed Sheets - Oce CS655 Pro User Manual

4
4.2

Loading tabbed sheets

Tabbed sheets can be used if the tray paper type is specified as tabbed sheets in the Paper Setting. Follow
the procedure below to supply the tray with tabbed sheets.
To load tabbed sheets in main body trays (tray 1 to 3)
0 The tray paper type should be specified as tabbed sheets. See page 9-33 for the details of Paper
Setting.
0 Example 1: 3 tabbed sheets loaded in position for one finished set
0 Example 2: 9 tabbed sheets loaded in position for 3 finished sets
Rear
Rear
1
Withdraw the tray to be loaded with tabbed sheets.
2
Open the paper feed roller.
3
Place tabbed sheets on the tray.
– Place paper referring to the illustration shown above.
4
Move the side guide plates to the edge of the paper.
– Set paper aligning it to the paper feed roller side of the tray.
– Press the release lever of the front side guide plate to move the side guide plates, and also move
the rear edge guide to the edge of the paper.
5
Push in the tray until it locks into place.
Reminder
Do not load above the limit level on the side guide plate.
Be sure that the side guide plates and rear edge guide are securely aligned to the paper; otherwise the
machine cannot detect the correct paper size, or machine trouble may occur.
4-10
1st TAB
Front
2nd TAB
3rd TAB
1st TAB
Front
2nd TAB
3rd TAB
Printed
side
ONE FINISHED SET
1st TAB
Printed
side
3rd TAB
Supplies & handling
Example 1:
1st TAB
2nd TAB
3rd TAB
Example 2:
2nd TAB
3 FINISHED SETS
CS655 Pro