Samsung CLX-8640 series Service Manual page 412

4. Troubleshooting
v) Remove the Cover-Open Assy. Remove 6 screws. And remove the bottom cover.
vi) Check if the sensor and actuator are assembled correctly.
c) When lifting the pick up assy, check that 2 rollers contacts normally.
4) Check if there are any obstacles or contamination in the paper path. Remove it.
5) Close the ADF cover.
6) Open the DADF unit. Check if the reflection film is contaminated. Clean it.
7) Close the DADF unit.
4-253 Copyright© 1995-2013 SAMSUNG. All rights reserved.