Glass Frame Removal - Lopi Sweet Dreams Manuals

Finalizing the Installation
2 0
2 Remove the glass following the directions below.
Warning: Do not strike or slam the glass.
N o t e : Verify the gasket (inside the glass frame) is intact and contacts the firebox when installed.
Open the four latches holding the glass
a
frame in place (start with the two below
the glass) - follow the directions shown
to the right.
Glass Frame
Lift the glass
b
frame up and
pull it forward to
remove.
Re-Attaching the Glass Frame:
a) Hang the glass frame on the firebox.
b) While holding in place, attach the upper latches
(follow the instructions to the right in reverse).
c) Lift the glass frame slightly and attach the lower latches.
Travis Industries
NOTE:
You may need to lift the glass
frame while re-attaching.
1 0 0 - 0 1 1 5 5
(for qualified installers only)
Spring Pin
Top of
Firebox
Glass
Latch Bracket
Insert the 1/4" key
into the spring
pin.
Twist 1/4 turn.
The spring pin will
disengage from the
latch bracket,
opening the latch.
4 0 4 0 9 0 3