Table of Contents
Advertisement
Optional Equipment
4 0
Blower
(SKU 99000158)
PACKING LIST
• Blower with Mounting Plate
• Four (4) # 8-32 Center Lock Nuts
• Four (4) Grommets & Bushings
INSTALLATION INSTRUCTIONS
WARNING:
1
Remove the access panel on the back of the stove.
1/4" Nutdriver
2
Insert the wiring harness, with strain relief plate attached, through the hole on the back of the stove.
Then attach the strain relief plate to the back plate with the included screws.
NOTE: the wiring harness should be
directed inwards, through an access hole
near the back of the gas control valve.
1/4" Nutdriver
Travis Industries
• Wiring Harness with Strain Relief Plate & Power Cord
• Two (2) # 8 x 3/8" HWHSSMS Screws
• Rheostat with Nut, Washer, and Knob
Make sure the gas has been shut off, power disconnected, and the appliance is
cool prior to conducting service.
Wiring Harness
NOTE: The grounding
wire is attached to the
strain relief plate.
Strain Relief Plate
1 0 0 - 0 1 1 5 5
(for qualified installers only)
4 0 4 0 9 0 3
Hide quick links:
Advertisement
Table of Contents
