Face And Glass Removal - Lopi Berkshire MV Owner's Manual

Face and Glass Removal

A barrier designed to reduce the risk of burns from the hot viewing glass is provided with this
appliance and shall be installed for the protection of children and other at-risk individuals.
The screen barrier attaches to the cast front of the stove. If the barrier becomes damaged, the
barrier shall be replaced with the manufacturer's barrier for this appliance. The part number for this
barrier is: 250-03731
The appliance must be completely cool before removing the glass.
Do not strike or slam the glass.
a
Lift the stove top off the
stove and place it aside.
b
Remove the stove front
by lifting it up then
forward. Place it aside.
Lift the glass frame slightly, swing the top forward, then lift
d
the glass frame to disengage it from the bottom guides.
Glass Frame
Glass Frame Guide
Re-Attaching the Glass Frame:
a) Slide the two brackets on the bottom of the glass frame into the glass frame guides
(hold the glass frame at a slight angle).
b) Swing the glass frame into place - you may have to lift it slightly to allow it to fit over the top of the firebox.
c) Attach the upper latches (follow the instructions above in reverse).
d) Replace the stove front and top.
© Travis Industries
Operation
NOTE:
The metal tabs on the stove front slide
over the tabs on the side castings.
10/2/17 - 1454
Open the two latches holding the glass frame in
c
place - follow the directions shown below
Pliers may be used
Top of
Firebox
Latch
Catch
(on glass frame)
Glass
Berkshire MV
29