Table of Contents
Advertisement
Optional Equipment
3
Attach the blower wires and grommets following the directions below.
a
b
4
Attach the blower (with blower plate) following the directions below.
11/32" Nutdriver
5
Replace the access panel (see step # 1 above).
6
Remove the control cover and discard the on/off wires following the directions below.
Travis Industries
Attach the two wires
labeled "BLOWER" to
the blower.
Insert the bushings
Blower
into the 4 grommets.
Mounting
Plate
Secure the blower to the stove with the 4 nuts
included with the blower.
1 0 0 - 0 1 1 5 5
(for qualified installers only)
Slide the 4 grommets onto
c
the blower mounting plate.
Remove and discard the wires
b
leading from the gas control valve
to the on/off switch.
Back of on/off
Gas Control Valve
a
Remove the control cover
and place it in front of the
stove.
Phillips
Screwdriver
4 1
switch
4 0 4 0 9 0 3
Hide quick links:
Advertisement
Table of Contents
